Filter
Top Products
25
CG10 Burner Manual
Propane Restrictor Description
The Beckett Propane Restrictor Conversion Kit allows
for the conversion of CG10 burners for use with propane
gas. With the proper installation of the restrictor and
attached O-ring, adjustments and settings for propane
use will be the same as the adjustments and settings for
natural gas use as detailed in the burner manual.
Installation
Note that Steps 1 and 2 on the following page refer to
fully assembled burners. Skip to Step 3 when converting
a burner without the air tube assembly installed.
Figure 15 – Propane Conversion Major Components
Figure 16 – Component Locations
Section: Maintenance and Service
This conversion kit shall
be installed by a qualifi ed
service agency in accordance with the
manufacturer’s instructions and all
applicable codes and requirements of the
authority having jurisdiction. (In Canada,
in accordance with the requirements
of the CAN/CGA-B149 Installation Code.) If the
information in these instructions is not followed
exactly, a fi re, explosion, or production of carbon
monoxide may result causing property damage,
personal injury or loss of life. The qualifi ed service
agency is responsible for the proper installation of
this kit. The installation is not proper and complete
until the operation of the converted appliance
is checked, as specifi ed in the manufacturer’s
instructions supplied with the kit.
Major Component Key for
Figure 16 & 17
A Air Tube
B Jacking Screw
C Internal Gas Tube
D External Gas Manifold
E Propane Restrictor
F Union
G Restrictor O-ring
H Gas Tube O-ring
B
H
G
E
C
D
A
H
G
E
F
C
B
A