Filter
Top Products
24 Maintenance
Travis Industries Newport 290902
Bi-Weekly Maintenance (or every 10 bags of pellets)
Clean the Heat Exchange Tubes
With the stove cool (or using the door
latch tool), move the heat exchange
cleaner up and down several times.
Keep the door closed so the
flyash does not enter the room.
Open the hopper lid.
The front edge of the hopper lid
becomes very hot, do not touch the
area below the handle.
WARNING:
This rod becomes very hot during
operation. Use the door latch tool or
other device to move the cleaner.
WARNING:
Vacuum Hopper
Run the stove until the pellets run out. Open the hopper and vacuum out the entire hopper. The
dust and any other debris near the bottom should be removed to prevent excessive build-up.
Cleaning the Optional Gold Surfaces (Door and optional Grill)
Fingerprints or other marks left on gold surfaces may become etched in place if they are not wiped
clean prior to turning the stove on. Clean the gold with denatured alcohol and a soft cloth (make sure
the heater is cool). Other cleaners may leave a film that may become etched into the gold.