Filter
Top Products
24 Finalizing the Installation (for qualified installers only)
Travis Industries 93508115 4050113
Log Installation
! Make sure the gas control valve is “OFF” and the heater is cool prior to conducting service.
! Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
NOTE: The burner must be correctly positioned. Grasp the burner, lift it up,
position the gas inlet tube over the burner tube, and slide the
burner all the way down (see page 35 for details).
Place the rear log so the pins on the
burner insert into the holes in the log.
Burner
The installed log set
should look like this.
Place the front right log so
the pins on the burner insert
into the holes in the log.
Place the front left log so the
pins on the burner insert into
the holes in the log.