Filter
Top Products
PAGE 18 REPAIR PARTS
ORDERING PARTS
There are a variety of options available for this pump. When ordering parts, give the pump serial number, size
and figure number and a complete description and item number of each part. Refer to the drawings and parts
list in the back of this manual. You should order parts from your local Aurora Pump distributor. Consult your
local telephone yellow pages for the office nearest you.
RETURNING PARTS
Unnecessary delays and wasted effort will be avoided if you use the proper procedure to return parts or
equipment. All materials or parts returned to the factory must have prior approval and a “Material Return
Authorization (MRA) Number.”
Contact your nearest Aurora Pump distributor, listing the material to be returned and the reason for the return.
He will contact the factory to obtain the required approval and “Material Return Authorization (MRA) Number.”
All materials to be returned should be carefully packaged to avoid damage in route from rough handling or
exposure to weather. The “Material Return Authorization (MRA) Number” shall be prominently displayed on the
packaging. All material is to be returned freight prepaid.
Aurora Pump makes improvements on its products from time to time and reserves the right to furnish improved
parts for repairs. A part that is received and is not identical in appearance, or has a different symbol from the
original part, may still be interchangeable. Examine the part carefully before contacting your Aurora Pump
distributor. The parts should never be returned to the factory without first obtaining proper authorization from
your Aurora Pump distributor.
RECOMMENDED SPARE PARTS
For Normal Dut
y
:
REF. NO. DESCRIPTION
14 SLEEVE, SHAFT
16 WEARING RING, CASING
17 WEARING RING, IMPELLER (IF ON ORIGINAL CONSTRUCTION)
163 BEARING, INBOARD / RADIAL
168 BEARING, OUTBOARD / THRUST
212 PACKING (OR MECHANICAL SEAL - 456)
GASKETS, COMPLETE SET
For Severe Dut
y
, Add The Followin
g
:
REF. NO. DESCRIPTION
COMPLETE ROTATING ASSEMBL
Y