Filter
Top Products
Adtron I35MB Operations Manual
Rev. 003, PN: 610200094
6
Removing the I35MB
To remove the I35MB from the hard disk drive bay:
1. Make sure that you are properly grounded.
2. Power down the computer.
3. Remove the chassis casing.
4. Disconnect the 80-conductor cable and the computer power supply cable from
the I35MB.
5. Unfasten the mounting screws and remove the I35MB from the disk drive bay.
Basic Operation
The I35MB operates as a storage subsystem that can be used as a boot device or as
additional storage.
Partitioning and Formatting
To the operating system, the I35MB looks like a single disk drive. All RAID-1
functions occurring in the I35MB are transparent to the operating system. Use the
operating system utilities to partition and/or format the I35MB hard disk drive.
Operating System Installation
The I35MB can be formatted like any standard hard disk drive – bootable for
operating system function or not bootable. Any standard disk partitioning and
formatting utility can be used. Any operating system chosen that is compatible with
IDE devices will be acceptable for use with the I35MB. The method of installing a
specific operating system can vary, so consult the operating system documentation
for instructions.