Filter
Top Products
Adtron I35MB Operations Manual
Rev. 003, PN: 610200094
2
Related Documents
• ANSI NCITS 340-2000 ATA/ATAPI-5 Specification
• I35MB Product Specification
• I35MB Installation Manual
Static Sensitive – The I35MB is a static sensitive device. While setting
jumpers, take precautions to ensure that static does not discharge into the
I35MB.
I35MB Jumper Settings
The master/slave and remote LED jumper is located on the front of the I35MB,
between the IDE and power connectors. This jumper is used to set master, slave,
cable select configurations and to mount a remote Activity LED. Refer to Figure 2 for
the location of this jumper.
The following figure shows the jumper location on the I35MB:
40-pin connector
IDE jumper options
Power connector
40 2
4 1
5 1
6 2
39 1
Figure 2 I35MB Jumper Locations