ADT Security Services 9600 Smoke Alarm User Manual


 
Features and Options Product Description
Unimode 9600 PN 51336:C 11/06/01 13
Annunciators:
ADT-AFM-LED Zone Annunciator Series
ADT-LDM Graphic Annunciator Series
ADT-LCD-80F Liquid Crystal Display point annunciator
ADT-ACM-8R Relay Module
Silence inhibit timer option per NAC
Autosilence timer option per NAC
Continuous, March Time, Temporal or California code for main circuit board NACs
with two-stage capability
Selectable strobe synchronization per NAC
Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules,
ADT-AFM annunciators or ADT-LCD-80F Remote annunciator
Auto-program (learn mode) reduces installation time. Reports two devices set to
the same address
Password and key-protected nonvolatile memory
User programmable password
Fully programmable from local keypad or keyboard or local PC
SLC operates up to 10,000 ft. (3,000 m) with twisted, shielded wire or 3,000 ft (900
m) with untwisted, unshielded wire
Compatible with newer series devices (CLIP Mode)
CP350: addressable Ionization Smoke Detector
SD350(T): addressable Photo Smoke Detector (T= with Thermal Sensor)
H350(R): Fast Response Heat Detector (R=Rate-of-Rise option)
D350P(R): addressable Photo Duct Detector (R=alarm relay option)
B501BH & B501BHT Sounder Bases
BB224RB Relay Base
BB224BI Isolator Base
MMF-300: Monitor Module
MDF-300: Dual Monitor Module (uses two consecutive SLC addresses)
MMF-301: Miniature Monitor Module
MMF-302: 2-wire Detector Module
CMF-300: Control Module
CRF-300: Relay Module
ADT-BG-12LX: Manual Pull Station
I300: Isolator Module
Compatible with legacy 300 Series devices (CLIP Mode only):
CP300: addressable Ionization Smoke Detector
SD300(T): addressable Photoelectric Smoke Detector (T= Thermal Sensor)
C304: Control Module
M300: Monitor Module
M301: Miniature Monitor Module
M302: 2-wire Detector Module
ADT-BG-10LX: Manual Pull Station
Optional 4XTMF module (conventional reverse polarity/city box transmitter)