Filter
Top Products
3M Accessories
3M Library Security System
4-22
E 3M 1999 September
Operating Instructions
Desensitizing Security Strips
Select the Desensitize mode.
Place the spine of a protected book or a compact disc
on the flat surface of the Model 966.
Slide the item to be desensitized in the direction of the
arrow while gently touching the item against the
vertical portion of the unit.
As the item passes the optical trigger, an audible
signal (thump) will indicate that the 3Mt
Tattle -Tapet Security Strip has been desensitized.
The orange verifier light will also turn off, confirming
that the security strip has been properly desensitized.
To ensure that items are properly desensitized, do not
place more than one item at a time on the Model 966.
Resensitizing Security Strips
Select the Sensitize mode.
Place the spine of a protected book or a compact disc
on the flat surface of the Model 966.
Slide the item to be sensitized in the direction of the
arrow while gently touching the item against the
vertical portion of the unit.
As the item passes the optical trigger, an audible
signal (thump) will indicate that the 3M Tattle-Tape
security strip has been sensitized.
To confirm that the security strip has been properly
sensitized, move the item to the center of the unit and
the orange verifier light should turn on. If the verifier
light does not turn on, then the item is not protected
with a 3M Tattle-Tape security strip.
To ensure that items are properly sensitized, do not
place more than one item at a time on the Model 966.
Desensitize Sensitize
Incorrect Methods of Sensitizing and Desensitizing