Filter
Top Products
3M Library Security SystemSystem Configuration
3-10
E 3M 1999 September
3.10 M3501/M3502 Detection System
Important Safety Instructions
Internal Use
The 3Mt Detection System Model 3501/3502 is
designed to detect the unauthorized removal of media
from the library. It i s designed to be positioned inside
the library at the library exit. All exiting t raffic should
be directed through the Model 3501/3502 to maximize
effectiveness. This system is designed for continuous
operation. For maximum protection of the library
media, use Tattle-Tapet Security Strips and 3Mt
Accessories.
Warning Labels
!
WARNING
High Voltage
Personal Injury Hazard. Risk of electrical shock present.
Not operator serviceable. Refer all servicing to 3M
factory trained service p ersonnel. Do not open o f enter
panels or electronic enclosure.
!
Caution
High Voltage
Personal Injury Hazard.
Attempting to change fuses without unplugging the
Detection System may cause personal injury. Inserting
the fuse holder in the incorrect direction could blow the
fuse.
To avoid any possibility of injury, disconnect the power
before attempting to change the fuse. To avoid blowing
the fuse, insert the fuse holder in the correct direction.
For continued protection against risk of fire, replace only
with the same type and rating of fuse.
!
Caution
Possible personal injury or equipment damage.
Incorrect configuration and installation of the 120/240
voltage selector may cause personal injury or equipment
damage.
Install the fuse holder/voltage selector in the correct
orientation. See additional information in this manual on
voltage configuration and fuses.