Filter
Top Products
3M Accessories
3M Library Security System
4-12
E 3M 1999 September
4.6 3Mt On-Counter Resensitizer Model
2011 (For Use With Recorded Magnetic
Media)
Description/Characteristics
The 3Mt On-counter Resensitizer Model 2011 is
designed to resensitize 3Mt Tattle-Tapet Security
Strips. This includes security strips which have been
surface-applied to audio cassettes or video cassettes.
This device is not intended to resensitize security
strips which have been applied directly to computer
disks, as the disks may be damaged.
Security strips must be resensitized when the marked
items are returned. Improperly resensitized items will
not alarm when passed through the library system.
Model 2011
Installation
The 3M Model 2011 is a moveable, non-electric,
on-counter device which requires no installation.
The 3M Model 2011 should be located away from
areas which are readily accessible to customers.
Operating Instructions
To resensitize security strips, pass the marked article
across t he surface of the 3M Model 2011. Make sure
the security strips are in full contact with the 3M
Model 2011.
Strips passed across the 3M Model 2011 i n the
direction opposite the arrows will not be resensitized.
Only one pass is necessary to fully resensitize each
security strip.
To avoid damage to credit cards or computer
software: Do not attempt to resensitize security
strips which have been applied directly to
computer software.
Do not permit credit cards or computer software
disks to make direct contact with the 3M Model
2001.