Filter
Top Products
Placement for Monitoring/Testing
Turning On/Off and Basic Operation
4
Turning On/Off and Basic Operation
To quickly get you started with the QUESTempº 34 & 36 model, the following section
explains how to turn on the instrument, run, and stop your session.
1. Press the I/O Enter key to turn on. Following the model and revision information
displayed on the screen, the main menu will appear.
Figure 1-3: Main menu of the QUESTempº 34 & 36
2. Press the I/O Enter key (when view is selected) to access the measurement
screens.
• The Wet and Dry measurements screen will display. (See Figure 1-6, page 9 for
screen example.)
3. To view different measurements, press the Up or Down arrow key to toggle through
the views.
NOTE: There are 5-user selectable languages. If you see the fields such as
Wet, Dry, WBGTi, and WBGTo this indicates the measurements are displaying
in English.
• To display an alternative language, select Setup from the main menu. Press
the Down arrow repeatedly until “English” (or the appropriate language)
appears. Then repeatedly press the I/O enter key to toggle through the
languages. Once selected, all menus and measurement screens will change to
the selected language. To return to the main menu, press the Run/Stop key.
4. To return to the main menu, press and hold the I/O Enter key (3, 2, 1 countdown
will appear) and the main menu will display.
• To select an option on the main menu, press the up or down arrow until an
arrow appears directly in front of the appropriate menu selection and then press
I/O enter key.
5. To power off, press and hold the I/O enter key from the main menu.
Placement for Monitoring/Testing
The QUESTempº 34 & 36 model should be placed at a height of 3.5 feet (1.1m) for
standing individuals or 2 feet (.6m) for seated individuals. Tripod mounting is
recommended to get the unit away from anything that might block radiant heat or air flow.
A 1/4"x 20 threaded bushing on the bottom of the instrument allows mounting to a standard
photographic tripod. Do not stand close to the unit during sampling.
NOTE: Before measuring, allow 10 mins. for the sensors readings to stabilize.
Indicator arrow
Indicates the selected menu
option. Then press I/O enter to
select or press up/down arrows
VIEW PRINT
SETUP RESET