Filter
Top Products
Operating QUESTempº 34 & 36
View
9
Operating QUESTempº 34 & 36
Use the Up Arrow and Down Arrow keys to move the marker in the display in
front of the desired mode. Pressing the I/O Enter key will select the mode.
View
Displays the measured data but does not log it. If more than one set of sensors is
plugged into the unit, these can be displayed by pressing and releasing the I/O
ENTER key. The displayed sensor set is shown in the upper right corner.
Figure 1-6: Viewing measured data
NOTE: To return to the menu, hold down the I/O ENTER key while a 3, 2, 1
countdown is shown in the lower right corner of the display. Then the menu
screen will appear (see Figure 1-3, page 4 for an example).
Setup
The setup screen is used to change the following parameters: temperature units,
language, time, date, logging rate (QUESTempº 36 only), selecting between Heat
Index and Humidex, and setting stay time parameters.
To Setup parameters do one of the following:
1. From the main menu, select Setup by pressing the I/O Enter key.
Figure 1-7: Setup selected in main menu
2. Use the Arrow keys to select an item (listed below).
• Temperature: Celsius, Fahrenheit.
• Language: English, Spanish, French, Italian, German.
• Time: 24 hour clock only.
• Date: Day-month-year format.
• Log Rate: 1, 2, 5, 10, 15, 30, 60 minutes.
• Heat Index (United States), Humidex (Canada)
WET 65.5º F 1
DRY 74.0º F
View mode
Indicates you are
viewing sensor one
data
Operating
VIEW PRINT
SETUP RESET
Setup selected