3M 34 Stove User Manual


 
Appendix D: Detection Management Software DMS
DMS Quick overview
28
Appendix D: Detection Management Software DMS
The QUESTemp° 34/36 has the flexibility to communicate, download data,
create reports, and save customized setups using the 3M
TM
Detection
Management Software DMS.
DMS Quick overview
The focus of this section is to briefly explain how to download, create quick
reports, and a quick overview of setup parameters. (Please refer to the DMS
User Manual for further instructions.)
Downloading your sessions in DMS
Once the QUESTemp 34/36 is communicating and run/stops are stored on
the instrument, this data may be downloaded into DMS for further analysis
and reporting.
Downloading your sessions
1. Download the DMS software. (Note: you may have purchased this
with your instrument.)
2. Using a 3M cable, part number 054-715, plug the cable into the
computer and plug the opposite end into the side jack of the QT34/36
data port.
Figure 1-24: Communicating to DMS
Appendix D
QT 34/36 data port
Connected and powered on
Connected to serial port