A SERVICE OF

logo

File > Save Study Configuration or click the Save Configuration icon.
Add AutoPilot to a Study Configuration
1. Click Modify Recording Details to open the Recording Details dialog box.
1. In the Recording Details dialog box, click AutoPilot.
2. Select to Enable AutoPilot.
3. When you enable AutoPilot, all other settings needed to run an AutoPilot session automatically
change to provide the recommended configuration.
4. Modify any other
recording details and click OK.
5. Save the study configuration file.
File > Save Study Configuration or click the Save Configuration icon.
Morae Recorder
Help PDF
Page 68
www.techsmith.com