START
OPTION DESCRIPTION
START
BUTTON
Using
Observer
Recording starts when an Observer clicks Start the recording
button on Observer’s toolbar.
Click the Start button in Recorder to wait for the start signal from
Observer.
If you leave the Observer name field blank, any Observer can
start Recorder.
You need to return to the Recorder computer between recordings to
click Start. To avoid this additional interaction with Recorder, see
Automatically Restart Recorder.
AutoPilot
Click the Start button to launch the AutoPilot interface.
Recording starts when the participant clicks Start after reading the
study instructions in AutoPilot.
Recorder Start
AutoPilot Start
See also:
• File Details
• Capture Options
• AutoPilot Settings
• Task Logger Settings
• Recorder Stop Settings
• Observer Settings
Automatically Restart Recorder
Enable the Automatically restart Recorder checkbox to automatically restart Recorder after each recording,
using the same recording settings.
The Automatically restart Recorder option does not work if you use the following Start and Stop options:
- Manual start
- Time based start with a date specified
- Time based stop with a date specified
- Event based start on a mouse click
To automatically restart Recorder:
1. In Recorder, click the Modify Recorder Details button. The Recording Details dialog box appears.
2. Click Recording Start and select the Recorder Start Setting.
3. Enable the Automatically restart Recorder checkbox.
4. Click File Details.
