Managing Print Jobs
4-3
4. Click the
Speed & Progress button. You see this dialog
box:
Select from the following options:
◗
High Speed Copies speeds up printing of multiple copies
of the same document by using your hard disk space as a
cache.
◗
Show Progress Meter
lets you control whether or not the
Progress Meter is displayed when you send a print job. See
page 1-5 for information on the Progress Meter.
◗
EPSON Printer Port
lets you optimize the transfer rate of
your printer port for EPSON printers instead of using the
Windows default printer port. You may see one of these
messages beneath the
EPSON Printer Port
option:
◗
High speed (DMA) transfer enabled tells you that
you’re already using fast DMA transfer mode.
◗
For higher data transfer rates, use DMA transfer
lets you know that you can speed up printing by
enabling DMA transfers on your system. See your
computer documentation for instructions.
5. Click
OK to close the dialog box and return to the Utility
menu. Then click
OK again to close the printer software
dialog box.
This section
appears only if
you have more
than one hard
drive
Note:
The folder you select in
the High Speed Copy
Folder box is also the
default spool directory.
Try changing this folder if
you get an error message
when trying to print.
Note:
If you see no message,
you cannot enable DMA
transfers on your system.
However, you may be
able to speed up printing
by setting your parallel
port to ECP mode. See
your computer
documentation for
instructions on selecting
ECP mode, if your
computer supports it.
