A SERVICE OF

logo

Page 16 Epson Research and Development
Vancouver Design Center
S1D13504 13504DCFG Configuration Program
X19A-B-008-02 Issue Date: 01/02/01
Defaults Tab
Figure 6: Defaults Tab
The Defaults Tab selects the following settings.
Note
The settings selected on this tab only affect the initial register values. The display and/or
color depth are not limited to the above selections and may be changed by software.
Defaults Tab
Initial Display
Select the default display device. Three display modes (LCD,
CRT, and Simultaneous) are saved, but the S1D13504 software
initializes the registers based on the default mode.
Panel Color Depth Selects the LCD panel initial color depth.
CRT Color Depth Selects the CRT initial color depth.