A SERVICE OF

logo

Click the button for the emulation mode you want to configure.
Note:
EpsonScript Level 2 is available only when the EpsonScript Level 2
option is installed.
LaserJet 4/EPSONScript Level 2 Mode
The main menu displays the current printer settings for the
selected printer mode. The buttons on the left open dialog
boxes so you can change the settings listed under Printer Status.
Print ERR SHEET for EpsonScript*
Turn this setting on if you want a printed record of EpsonScript
Level 2 errors. When an error is detected, the printer prints a
sheet listing the type of error.
*Available only when the EpsonScript Level 2 option is installed
rcp1
L
Albatross Rev.c
A5 size Chapter 4
’96/08/23 DR, pass 0
4-4
Remote Control Panel Utility