To load paper manually, follow the steps below.
1. Access the printer driver menus in one of the following ways:
Note:
If you have not installed the printer driver, see your Getting
Ready! guide for installation instructions.
❑
For access through your application software, click the
Print
or
Printer Setup
command in the File menu. You
also may need to click
Setup
,
Options
,
Properties
, or a
combination of these buttons.
❑
For direct access through Windows 95, click
Start
, point to
Settings
, and click
Printers
. Next, right-click the
EPSON
EPL-N2000
icon and click
Properties
in the menu that
appears. Be sure to right-click the printer icon. Then select
the
Details
tab at the top of the window, and click the
Setup
button.
❑
For direct access through Windows 3.1, Windows 3.11 for
Workgroups, and Windows NT 3.51, double-click the
Printers
icon in the Control Panel dialog box. Next, click
EPSON EPL-N2000
in the Installed Printers list box, and
then click the
Setup
button.
2. The Printer Settings menu appears. Click on the arrow next to
the Paper Source box to see the list of sources available.
Click Manual Feed.
3. Click the Paper tab to see the Paper menu. Click the arrow
next to the Paper Size box to see the list of available paper
sizes.
Scroll through this list and click on the paper size that matches
the paper you will load in the printer.
R
Albatross Rev.c
A5 size Chapter 1
96/08/23 Pass 0, DR
Paper Handling
1-3
