The BarCode setting converts bit images to bar codes by
automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. BarCode is not available in I239X mode.
This mode reduces the size of the image being printed and may
cause some distortion when printing bit-image graphics.
ZeroChar
This option determines whether the printer prints a slashed
zero (0) or an unslashed zero (0). This feature is useful for
clearly distinguishing between an uppercase letter O and zero
when printing documents such as program lists.
The table below shows the available parameters for each setting
in ESC/P 2 and FX modes. See the previous pages for a
detailed description of each setting.
Setting Parameter
Font Courier, Prestige, Roman, Sans serif,
Roman T*, Orator S, Sans H*, Script, OCR B
Pitch 10 cpi, 12 cpi, 15 cpi, Prop.
Condensed Off, On
T. Margin 0.40 - 1.50 inch
Text 1 - 81 Lines
CG Table PcUSA, Italic, PcMultilin, PcPortugue,
PcCanFrenc, PcNordic, PcTurkish2,
PcE. Europe, BpBRASII, BpAbicomp
Country USA, France, Germany, UK, Denmark, Sweden,
Italy, Spain1, Japan, Norway, Denmark2,
Spain2, LatinAmeric, Korea*, Legal*
Auto CR On, Off
Auto LF Off, On
Bit Image Dark, Light, BarCode
ZeroChar 0, 0
*Available only in ESC/P 2 mode.
L
Albatross Rev. c
A5 size Chapter 5
96/08/23 Pass 0, DR
5-26
SelecType
