Missing areas on printed image
Your paper may be moist or damp. Printing is sensitive to
moisture absorbed by the paper. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
You may not be using the correct type of paper for your printer.
If the surface of your paper is too rough, printed characters
appear distorted or broken. Smooth, high-quality copier paper
is recommended for best results. See “Paper Specifications” in
Appendix A for information on choosing paper.
Completely blank pages
If after checking the SelecType
Toner
option in the Setup
Menu,
the
Toner
message indicates that the amount of toner is low
(
E* F
), read “Replacing the Imaging Cartridge” starting on page
6-28.
Check that the Imaging Cartridge is installed as described in
the
Getting Ready!
booklet or in “Replacing the Imaging
Cartridge” on page 6-28.
The problem may be with your software program or interface
cable. Print out a status sheet. If blank pages continue to print,
the problem may be with the printer. Turn off the printer and
contact your dealer.
L
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
6-12
Troubleshooting and Maintenance
