XOn/XOff
Use this option to set XOn/XOff communications protocol to
On
,
Off
, or
Robust
. You can use XOn/XOff protocol in
combination with the DTR option setting. If set to
Robust
, the
printer sends an XOn signal every second the printer is waiting
to receive data.
DTR
Use DTR (Data Terminal Ready) to turn the printer’s DTR
communications protocol on or off. You can use DTR protocol
in combination with the XOn/XOff option setting.
Buffer Size
Determines the amount of memory to be used for receiving
data and printing data. If set to
Maximum
, more memory is
allocated for receiving data. If set to
Minimum
, more memory
is allocated for printing data. The factory default setting is
Normal
.
L/T Menu, AUX Menu
Buffer Size
Determines the amount of memory to be used for receiving
data and printing data. If set to
Maximum
, more memory is
allocated for receiving data. If set to
Minimum
, more memory
is allocated for printing data. The factory default setting is
Normal
.
L
Albatross Rev. c
A5 size Chapter 5
96/08/23 Pass 0, DR
5-18
SelecType
