Filter
Top Products
36
the next program period. See OPER-
ATING YOUR THERMOSTAT.
• You have programmed the incorrect
day or time. Check your programming
(be sure that the times you programmed
are correct AM or PM times). See PRO-
GRAMMING YOUR THERMOSTAT.
• The thermostat is in the HOLD mode.
Press
RUN
PRGM
to start program operation.
See OPERATING YOUR THERMO-
STAT.
• The compressor lockout feature is op-
erating; wait about 5 minutes for system
to begin running. See OPERATING
YOUR THERMOSTAT.
11. Why does the blower fan keep running
after the system has turned off?
• You have programmed the fan to run
continuously during this period. See
PROGRAMMING YOUR THERMO-
STAT.
• The blower delay feature is operating.
This energy saving feature continues to
blow conditioned air through the ducts
after the system has turned off, rather
than letting the air dissipate.
12. Why is the system turning on and off so
frequently (seldom)?
The anticipation setting is too low (high).
To change anticipation settings, see OP-
ERATING YOUR THERMOSTAT.