Filter
Top Products
32
1. How can I permanently change a part of
my program?
Press
VIEW
PRGM
and
ADV
DAY
until you reach the
time/temperature schedule you want. Then
press or and
TIME
FWD
and
TIME
BACK
to
change the program. See PROGRAM-
MING YOUR THERMOSTAT.
2. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat
will enter the HOLD mode and maintain a
constant temperature. The display will
change to the time/temperature mode. To
resume programming, press
VIEW
PRGM
and
ADV
DAY
until you return to the point where you
stopped programming. Then you may con-
tinue to program the thermostat normally.
If you want to stop programming at this
point, press
RUN
PRGM
to start the normal pro-
gram function. See PROGRAMMING
YOUR THERMOSTAT.
3. What happens if the electricity goes off
or is manually shut off?
If you have not installed a 9 volt alkaline
battery, the display will go blank and the
program will be lost in five seconds. When
electricity is restored, the thermostat will
maintain a heating temperature of 64°F
and a cooling temperature of 82°F until you
QUESTIONS AND ANSWERS