Filter
Top Products
29
Using The COPY Button
You can copy the entire heating/cooling pro-
gram into any or all other days’ programs.
However, you must perform each copy function
separately. Each time you begin a COPY op-
eration, you must start with the day’s program
you wish to copy FROM. A COPY operation is
not complete until
HOLD
COPY
has been pressed
TWICE.
For most efficient programming, you should
enter both the heating and cooling programs
for the day you wish to copy FROM before
using the COPY function, since the COPY
function copies the entire day’s heating and
cooling programs to other days.
1. Press
VIEW
PRGM
.
2. Press
ADV
DAY
until the day you want to copy
FROM is displayed. If you have not com-
pleted programming for this day, do so
before proceeding.
3. Press
HOLD
COPY
once. COPY will appear on the
display. A number from 1 to 7 will also
appear, representing the day you have
selected to copy (Monday is 1, Tuesday is
2, Wednesday is 3, etc.). For example, if in
step 2 you displayed Wednesday’s pro-
gram, when you press
HOLD
COPY
, COPY 3 will
appear in the display (as shown below).
EXAMPLE:
NOTE