Filter
Top Products
25
This display window shows that for
Monday’s occupied heating period, the start
time is 8:00 AM, 70° is the programmed
temperature, and the fan is set to PRG
FAN (continuous fan operation); this ex-
ample reflects factory preprogramming,
where 70° is the HEAT O temperature.
3. To change the displayed start time to your
selected start time for Monday’s occupied
heating period, press
TIME
FWD
or
TIME
BACK
until your
selected time appears. The time will change
in 15 minute increments.
4. If the temperature displayed is not the
HEAT O temperature you want for
Monday’s occupied heating period, press
or (if you continue to press
or , the display will alternate
between the HEAT O and HEAT U tem-
peratures you previously selected).
Damper operation is linked to the occupied or
unoccupied temperature selections, not to the
occupied or unoccupied time periods. The
damper will be open only during periods with
occupied temperatures. Therefore, we sug-
gest that you program occupied temperatures
during occupied periods and unoccupied tem-
peratures during unoccupied periods.
5. If you want the fan to run continuously
during Monday’s occupied heating period,
press
FAN
SWITCH
until PRG FAN is displayed.
NOTE