Filter
Top Products
22
ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermo-
stat from the wall for programming (especially
for entering cooling programming). A fresh 9
volt Energizer
®
alkaline battery must be in-
stalled to perform off-wall programming. BE
SURE SYSTEM SWITCH IS SET TO OFF
POSITION BEFORE REATTACHING
THERMOSTAT TO SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press
SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct minutes.
3. Press
SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct hour and AM/PM desig-
nation (AM begins at midnight; PM begins
at noon).
NOTE