Filter
Top Products
Part Number PLUS-E017-A/1206
17
Manual • Installation • Start-Up • Usage • Maintenance • Parts
Start-up checklist
❏ Long element T&P relief valve is properly installed and drain discharge is directed away
from all persons.
❏ Both inner and outer tanks are filled with water.
❏ All air has been bled from both domestic and boiler water systems.
❏ Automatic air vent is installed and cap is unscrewed one full turn.
❏ Cold and hot water lines are correctly connected to domestic water system.
❏ Supply and return piping from boiler is correctly connected to water heater.
❏ All wiring is installed correctly.
❏ Thermostat on water heater is set according to system requirements. See pages 18–19.
❏ Boiler and water heater are operating properly.
❏ Fittings and piping have been checked for leaks.
❏ Installer has reviewed the following sections with system maintainer:
• Water Heater Start-Up
• Adjusting Water Heater Temperature
• Water Heater Maintenance
Water heater start-up continued
A4