Filter
Top Products
35
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
OPTIONAL INSTALLATION
DoorMaster
TM
Bracket
NOTE: When installing a DoorMaster
TM
operator use the center bracket and
drive gear supplied with your operator
(located in DoorMaster
TM
package).
Slide the DoorMaster
TM
bracket/drive
gear assembly onto the TorqueMaster
®
spring tube, so that the drive gear/
center bracket assembly are in the
center of the TorqueMaster
®
spring
tube.
NOTE: After completing this step,
continue with step 15 on page 23.
CENTER
BRACKET
BUSHING
ASSEMBLY
TORQUEMASTER
®
TUBE
A
A
DOORMASTER
TM
BRACKET/
DRIVE GEAR ASSEMBLY
Locate the center bracket, mark the
header halfway between the flagangles
and level the TorqueMaster
®
spring
tube. Drill 1/8” pilot holes for the lag
screws. Fasten the metal bracket to
the header using (2) 1/4” x 1-1/2” lag
screws.
NOTE: After completing this step,
continue with step 25 on page 30.
B
B
Tools Needed:
Power Drill
1/8” Drill Bit
7/16” Socket
Driver
DOORMASTER
TM
BRACKET/
DRIVE GEAR ASSEMBLY
TORQUEMASTER
®
TUBE
(2) 1/4” X 1-1/2”
LAG SCREWS