Filter
Top Products
16
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
Stacking Sections
NOTE: For door section identification
see page 4.
NOTE: Make sure hinge leafs are
flipped down, when stacking another
section on top.
Place rollers in hinge tubes of the
second section (lock section).
With assistance, lift second section and
guide rollers into the vertical tracks.
Keep sections aligned and fasten
hinges to connect the sections using
1/4”-14 x 5/8” self tapping screws.
Repeat for other section(s) except top
section.
IMPORTANT: PUSH AND HOLD THE
HINGE LEAFS AGAINST THE SECTION
WHILE SECURING WITH 1/4”- 14 X 5/8”
SELF TAPPING SCREWS. END HINGES
HAVE (2) SCREWS AND INTERMEDIATE
HINGES HAVE (3) SCREWS.
NOTE: Install lock at this time (sold
separately). See instructions in
OPTIONAL SIDELOCK INSTALLATION on
page 34.
7
Power Drill
7/16” Socket
Driver
(2) 1/4”-14 X 5/8”
SELF TAPPING SCREWS
END HINGES (LEFT HAND SHOWN, RIGHT HINGE SYMMETRICALLY OPPOSITE)
INTERMEDIATE HINGES
(3) 1/4”-14 X 5/8” SELF TAPPING
SCREWS
LOCK SECTION