Filter
Top Products
13
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
INSTALLATION
3
NOTE: For door section identification
see page 4.
NOTE: 9700 doors 18’ - 0” (5486 mm)
wide will be supplied with one u-bar for
the lock section.
Center the u-bar on top edge of lock
section and flush with edge of
section. Fasten each end of the u-bar
to the endcap with 1/4” - 20 x 7/8”
self-drilling screws and 1/4” - 20 x 5/8”
self-tapping-screws at 30” - 36” inches
(762 mm - 914 mm) intervals across
the section.
U-Bar
Power Drill
7/16” Socket
Driver
Level
Tape Measure
1/4” - 14 x 5/8”
SELF TAPPING SCREWS
30” - 36”
(2) 1/4”-20 X 7/8”
SELF DRILLING
SCREWS
ATTACHING ENDS AND CENTER OF U-BAR
LOCK SECTION
U-BAR
U-BAR
EDGE
LOCK SECTION