Filter
Top Products
17
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
INSTALLATION
Top Brackets
Power Drill
7/16” Socket
Driver
NOTE: For door section identification
see page 4.
To install the L-shaped top brackets,
align the bottom holes in the top
bracket base with the second set of
holes from the endcap.
Fasten using (4) 1/4” - 14 x 5/8” self
tapping screws. Secure the top bracket
slide to the bracket base loosely using
(2) 1/4” - 20 x 5/8” carriage bolts and
(2) 1/4” - 20 flanged hex nuts. The
top bracket slide will be tightened and
adjusted in Step 12. Insert rollers into
top bracket slide. Repeat for other side.
8
(4) 1/4” - 14 x 5/8”
SELF TAPPING
SCREWS
TOP BRACKET BASE
TOP BRACKET SLIDE
(2) 1/4” - 20
FLANGED HEX
NUTS
ROLLER
TOP BRACKET SLIDE
TOP SECTION
TOP SECTION
TOP SECTION
(2) 1/4” - 20 x 5/8”
CARRIAGE BOLTS
2ND SET OF HOLES
FROM BOTTOM
2ND SET OF HOLES
FROM BOTTOM