Filter
Top Products
VIVOTEK
24 - User's Manual
1
2
3
6
AM-51A
AM-116
AM-212
4
5
Wall Mount Bracket Installation
Below is a sample procedure using a wall mount bracket and a pendant pipe:
1. Determine a hard surface ceiling location. Use the four mounting holes on the wall mount
bracket to mark the positions where holes will be drilled to secure the bracket and routing
cables. Note that screws are user-supplied and they should be at least 11mm long.
2. Feed cables through the bracket.
3. Install the pendant pipe.
4. Install the camera to the mounting adapter. See Attach Camera to Mounting Adapter on the
previous page.
5. Install the mounting adapter to pendant pipe.
6. Tighten the connection using the included hex wrench.