Filter
Top Products
VIVOTEK
User's Manual - 19
30~100cm
7. Install the speed dome camera next to the sheye, with their lens positioned at approximately
the same height. For details about speed dome installation, please refer to its documentation.
8. Connect all cabling, including the IO cables to J6 and J7, and the Ethernet cable to RJ-45
connector.
9. Install the dome cover by fasteninng the anti-tamper screws.
NOTE:
If DC power is preferred, it should comply with: O/P: 12VDC, 1.5Amin., L.P.S. per IEC 60950-1.