Filter
Top Products
VIVOTEK
User's Manual - 239
8.29 Remote Camera Control
(capability.remotecamctrl.master>0)
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/rCamCtrl.cgi?[channel=<value>]
[&x=<value>&y=<value>&r=<value>&videosize=<value>&resolution=<value>&stretch=<value>] – Click on
image
[&camid=<value>]
[&return=<return page>]
Example:
http://myserver/cgi-bin/camctrl/rcamctrl.cgi?channel=0&x=300&y=200&r=100&resolution=1920x1920&videos
ize=1920x1920&strech=1&camid=0
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
x <integer> x-coordinate clicked by user.
It will be the x-coordinate of client side camera after movement.
y <integer> y-coordinate clicked by user.
It will be the y-coordinate of client side camera after movement.
r <integer> radius select by user. It will be the roi view area radius of client side
camera after movement and zooming.
videosize <window size> The size of plug-in (ActiveX) window in web page
resolution <window size> The resolution of streaming.
stretch <boolean> 0 indicates that it uses resolution (streaming size) as the range of
the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of the
coordinate system.
camid 0,<positive integer> slave camera ID
return <return page> Redirect to the page <return page> after the parameter is assigned.
The <return page> can be a full URL path or relative path according to
the current path. If you omit this parameter, it will redirect to an
empty page.