Filter
Top Products
– 152 –
Heat exchanger
FinguardFinguard
Air-outlet cabinet
Inverter Side cabinet
Valve fixed plate Side cabinet
Upper side of the end
plate of heat exchanger
Upper side of the end
plate of heat exchanger
Air-outlet cabinet
No.
Part name
Air-outlet cabinet
Side cabinet
Procedure
1. Detachment
1) Perform the work in 1 of .
2) Take off screws for the air-outlet cabinet
and the partition plate.
(ST1T Ø4 × 10, 3 pcs.)
3) Take off screws for the air-outlet cabinet
and the base plate.
(ST1T Ø4 × 10, 2 pcs.)
4) Take off screw for the air-outlet cabinet
and the heat exchanger.
(ST1T Ø4 × 10, 1 pc.)
5) Take off screws for the air-outlet cabinet
and the fin guard.
(ST1T Ø4 × 10, 2 pcs.)
2. Attachment
1) Put the upper left side of the air-outlet
cabinet on the end plate of heat ex-
changer, and fix it with screw.
(ST1T Ø4 × 10, 1 pc.)
2) Attach the taken-off screws to the
original positions.
1) Perform the work in 1 of .
2) Take off screws fixing the inverter and
the side cabinet.
(ST1T Ø4 × 10, 2 pcs.)
3) Take off screws for the side cabinet and
the valve fixed plate.
(ST1T Ø4 × 10, 2 pcs.)
4) Take off screw for the side cabinet and
the piping panel (Rear).
(ST1T Ø4 × 10, 1 pc.)
5) Take off screw for the side cabinet and
the base plate.
(ST1T Ø4 × 10, 1 pc.)
6) Take off screws for the side cabinet and
the fin guard.
(ST1T Ø4 × 10, 4 pcs.)
Remarks