Filter
Top Products
v2.0
user guide Page 6
[REC]: If the programme currently selected in the grid has a series-link
recording, pressing [REC] enters the Edit Pattern screen (see below)
for this series-link.
If that’s not the case and the currently selected programme has a
recording, pressing [REC] tries to turn this into a series-link
recording.
If that’s not the case and the currently selected programme has a
watch timer, pressing [REC] turns this into a ‘Recording’ timer.
If that’s not the case then pressing [REC] creates a Recording timer
for the currently selected programme.
Note that it is only possible to set two simultaneous recordings. If you
try to set a third recording at the same time as two existing timers,
you will be warned of the clash in a popup – press any key to
continue.
[WHITE]: As [REC], except that in the last instance a Watch timer is created
rather than a Recording timer.
[PAUSE]: If the currently selected programme has a recording, enter the
recording edit screen for it.
[STOP]: If the programme currently selected in the grid has a recording, a
watch timer or a series-link, you will be asked if you really want to
delete it: pressing the [YELLOW] key will confirm this, causing the
recording to be deleted. If the recording was part of a series link, other
recordings on the same pattern will remain; recording of future
editions of the episode just deleted will be inhibited by the fact that
you’ve just deleted this one – iGuide keeps a record of deletions, and
assumes that a deleted episode is definitely not wanted. If you want to
record a future edition of the episode, you will need to either manually
set a recording for it, or ‘refresh’ the series link pattern (see below).
[INFO]: Show full information for the currently selected programme in a
popup window; press any key to exit the window.
[SLOW]: Toggle between EPG grid mode and single-channel per page mode.
[PLAY]: Exit the screen and tune to the currently selected channel.
[RECALL]: Repopulate EPG information for the currently selected channel.
[TEXT]: Start a search. Pressing [TEXT] opens a prompt which asks for a
series of comma-delimited search terms to be typed in, using the
standard editing keys in Edit Mode (see below)
Press [BLUE] to toggle between just searching programme titles and
searching both titles and descriptions; press [FFW] or [REW] to cycle
through the genre list, to enable search by a particular genre.