Filter
Top Products
v2.0
user guide Page 14
JUMP PERIOD: The number of minutes forward or
backward that IntuiLeap will initially use when
starting a home-in navigation. Defaults to five
minutes.
BACKGROUND IMAGE/SOUND: Allows the user to
choose whether or not to have background music
(or silence) in iGuide pages, and whether or not
to view the currently broadcast programme
through those pages. The choices are:
iGuide/iGuide: the background image used is as set in the skin, and background
music found in the /ProgramFiles/iguide folder is played (or silence if nonesuch
exists).
iGuide/broadcast: the background image used is as set in the skin, but the
soundtrack from the currently tuned channel continues.
broadcast/broadcast: the background image used is transparent so the the currently
tuned channel can be seen and heard behind whatever pages iGuide shows.
CREATE ALL TIMERS: By default iGuide will only create a small number of timers for
future recordings, typically ten. This is for efficiency’s sake: iGuide updates its
timers whenever a new recording is added or an old one deleted, to make best use
of the tuners, and actually adding real timers is a slow process. Whenever a
recording starts, the list of timers is updated again and new timers added – so the
fact that not all timers are created at once should never be a problem.
However, some other TAPs benefit if all timers are created – they also need to
know if a recording is coming up.
Set this option to ‘no’ (the default) if iGuide is the only TAP running that needs to
know about all timers, or ‘yes’ if other TAPs also need this information.
iGuideSMS PHONE ATTACHED or iGuideSMS NO PHONE ATTACHED: Shows the
status of the iGuideSMS companion TAP, which allows timers to be set by sending
an SMS text to a mobile phone connected to the Toppy by a serial cable. See the
iGuideSMS quick guide below for further details.
RELOAD: Causes iGuide to re-initialise – useful if, for example, new logo files have been
added into the iguide directory, or config files manually edited.
EXIT iGuide: Causes the TAP to unload itself from memory. Pressing [WHITE] at any time
while viewing one of the Configuration screens has the same effect.
CREDITS: Use [OK] to select. (I got bored. )