Topfield v2.0 Water System User Manual


 
v2.0
user guide Page 12
recording by deleting it a second time from the recordings/timers screen when it is
viewed there.
KEEP CONTIGUOUS RECORDINGS...: apart; together:
The apart setting places recordings of programmes in succession on the same
channel in separate recording files. This is easier to handle, but means that padding
between the two needs to be nil: therefore, the end of the first programme may
actually be found in the recording of the second.
The together setting places recordings of contiguous programmes on a single
channel into a single on-disk recording, and manages information to ensure that
each appears separate from the others.
MAY I SUGGEST: Enables the May I Suggest feature of
iGuide which attempts to predict programmes
you may like but not yet know about, based on
your existing recordings. The options are no
which disables it, or 5, 10 or 15 suggestions. See
the section above for a full description of MIS.
NAVIGATION: The number of lines to scroll the EPG
page by, when pressing the [UP/DOWN
ARROW] in the EPG grid screen while the highlighted programme is in either the
first or last row. Use [LEFT/RIGHT ARROW] to choose one of:
full page – the default behaviour, all seven visible channels are replaced with the
next/previous seven
full page, keep current channel – the current channel moves to the top or bottom
position as appropriate and the next/previous six channels are displayed
half page – the current channels scroll up or down as appropriate such that the
current highlighted channel takes the middle position, and the next/previous three
channels are displayed above or below as necessary.
one channel at a time – the current channels scroll up or down as appropriate by
one line, and the next/previous channel selected and displayed.
GMT OFFSET YEAR-END and GMT OFFSET MID-YEAR: The offset, in hours, from
GMT in Northern hemisphere winter and summer respectively: defaults to the UK
0 and +1. Daylight Savings Time is calculated according to the European (and
Australian) standard: DST begins (ends) on the last Sunday in March at 2.00am; it
ends (begins) on the last Sunday in October at 2.00am
USE [REC] FOR WATCH: If set to ‘yes’, pressing [REC] (or, possibly, [OK]) on a selected
programme in the EPG grid or now-and-next banner will have the default action of
setting a watch timer. If set to ‘no’, the default action is to set a recording timer.
USE OK TO SET TIMER: Sets whether or not to allow [OK] to be used to set timers and
change recording status to Series Link in the EPG and Recordings and Timers
pages.
For some people, using [OK] in this way is intuitive and useful; for others, it causes
a large number of timers to be set by mistake.