Filter
Top Products
Safety Messages Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 3
SAFETY MESSAGES
Warning and cautionary messages are provided for the purpose of avoiding risk of personal injury or
instrument damage. These important safety messages and associated safety alert symbols are found
throughout this manual; the safety symbols are also located inside the instrument(s). It is imperative
that you pay close attention to these messages, the descriptions of which are as follows:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Technician Symbol: All operations marked with this symbol are to
be performed by qualified maintenance personnel only.
DO NOT TOUCH: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s)
and/or the instrument.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
CAUTION – GENERAL SAFETY HAZARD
This instrument should only be used for the purpose and in the manner described in this
manual. If you use this instrument in a manner other than that for which it was intended,
unpredictable behavior could ensue with possible hazardous consequences.
Never use any gas analyzer to sample combustible gas(es).
Note
Technical Assistance regarding the use and maintenance of this or any other Teledyne product can be
obtained by contacting Teledyne’s Customer Service Department:
Telephone: 800-324-5190
Email: api-customerservice@teledyne.com
or by accessing various service options on our website at http://www.teledyne-api.com/.