Filter
Top Products
product.
k. The place where strong high frequency is generated.
l. The place where lightning disaster is expected.
m. The place where the product is directly exposed to the vibration and impact.
n. The situation where the force and weight that causes deformation of the product is applied.
3. Do not use air containing mist or dust.
Air containing mist or dust may lower function and shorten maintenance cycle. Mount mist separator
and air dryer in front of filter to produce clean compressed air.
4. Ionizer and sensor are not tolerable against surge of lightning.
Protection against lightning surge should be incorporated in the equipment..
CAUTION
1. Keep electrode needle clean by regular maintenance.
Make sure that the equipment is operating without any failure by regular maintenance. Those who
have enough knowledge and experience should perform the maintenance of the equipment.
Dust attached on the electrode needle due to longer operating lowers the function to eliminate static
electricity. If electrode does not recover its function to eliminate static electricity due to worn out after
cleaning, replace it with the new one. In order to maintain the stable performance, regular
maintenance and cleaning of electrode are recommended.
2. Stop supplying power to the body without fail when cleaning the electrode needle or exchanging the
electrode cartridge. Do not ouch the electrode needle while energizing, or it may cause electric
shock or accident.
3. Do not open the case to disassemble and reconstruct the product.
It may cause electric shock, operation failure and disaster such as fire. In addition, note the product,
which is disassembled or reconstructed, may not satisfy the functions and performance in the
specifications and is out of guarantee.
WARNING
1. Do not drop, hit to the object and give excessive impact (10G or more) at handling.
Though Ionizer itself doesn’t break, inside construction might be broken and cause malfunction.
2. When cable is mounted or eliminated, pinch modular plug claw with finger and insert or take out the
plug itself vertically. If mounted or eliminated to inappropriate direction, mounting part of modular jack
might be damaged and finally it leads to operation failure.
3. Do not operate with wet hands. It may cause electric shock or accident.
Maintenance
Handling