Filter
Top Products
3. Peal off the seal attached on the detecting hole of the surface electric potential sensor.
4. Direct the surface electric potential sensor to the target’s static charge as adjusting the angle, and
fix the detent thread (M5) of bracket.
Recommended tightening torque for detent thread : 1.5 Nm
4-3. Connection of cable
1. Insert the modular plug of power supply cable ZS30-CP into the modular jack for indicating
[power] on the ionizer body. A lever will snap when the modular plug is correctly locked.
Fix cables with a tie wrap or other measures in the vicinity of connection not to apply
compulsive force to the modular jack and plug.
Seal
Modular plug