Singer CE-200 Sewing Machine User Manual


 
82
OPERATION SWITCHES WHEN
EMBROIDERY UNIT IS ATTACHED
OPERATION SWITCHES
Reverse stitch switch
Needle up/down switch
Start/stop switch
(For embroidery only)
LED indicator
TÉMOIN A DIODE
Indicador LED
Touche couture arrière
Touche marche/arrêt
(Pour la broderie seulement)
Pulsador de comienzo/parada
(Sólo para bordado)
Interruptor de puntadas
hacia atrás
Interruptor agja arriba/abajo
Positionnement haut/bas
de l’aiguille
START/STOP MACHINE
When start/stop switch is pushed, machine starts slowly, and
when the switch is pushed once more, the needle moves and
stops at its highest position.
NEEDLE UP/DOWN SWITCH
Embroidering can be advanced one stitch at a time (The hoop
moves.), after the embroidery data has been transferred.
To advance continuously, press and hold this switch.
REVERSE STITCH SWITCH
Embroidering can be reversed one stitch at a time (The hoop
moves.), after the embroidery data has been transferred.
To reverse continuously, press and hold this switch. Embroidering
can be reversed until the start of the embroidery data, after which
it will no longer move.
LED INDICATOR
¿ Green light indicates machine is ready to start.
¿ Red light indicates machine is operating.
¿ Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect operation
was made.
* Continuous flashing indicates that machine malfunctions.
THREAD TENSION CONTROL
Set it at “ E ” for embroidery to loosen thread tension.