Filter
Top Products
42
mm
5.10.25.20.35.30.45.40.55.50.65.657.6
3.0
5.0
8.0
0.1
5.1
0.2
5.2
0.3
5.3
0.4
5.4
0.5
ZIGZAG STITCHING
The top thread may appear on the bottom depending on the
thread, fabric, type of stitch and sewing speed, but the bobbin
thread must never appear on the top of the fabric.
Under side
Côté de dessous
Reverso
Top side
Côté de dessus
Cara
SETTINGS :Presser foot - Zigzag foot
:Thread tension control - S - E
STITCH LENGTH
LONGUEUR DU POINT
LARGO PUNTADA
STITCH WIDTH
LARGEUR DU POINT
ANCHO PUNTADA
is values set automatically when pattern (No. 03) is set.
The stitch length is 2 mm and the stitch width is about 5 mm.
is the selection range when setting the value manually.
ADJUSTING STITCH WIDTH AND LENGTH
PLACEMENT OF PATTERNS
Stitch width of pattern increases from center needle position as
illustrated.
Center position
Position centrale
Aguja posicionada en el centro
03
SATIN STITCH
This is a closely spaced attractive stitch for appliqué, bar-tacking,
etc. Slightly loosen top thread tension for satin stitching. Set
length between 0.5 and 2.0.
Use a backing of stabilizer for sheer materials to avoid
puckering.