Singer CE-200 Sewing Machine User Manual


 
3
1. KNOWING YOUR SEWING MACHINE
Machine identification --------------------------------------------------- 6 - 7
Accessories ----------------------------------------------------------------- 8 - 9
Setting up your machine -------------------------------------------- 10 - 11
Operation switches ----------------------------------------------------12 - 13
Spool pins ----------------------------------------------------------------14 - 15
Presser foot lifter, Feed dog control ------------------------------16 - 17
Converting to free-arm sewing, Leveling Machine ---------18 - 19
Winding bobbin---------------------------------------------------------20 - 21
Threading the bobbin thread --------------------------------------22 - 23
Threading the top thread --------------------------------------------24 - 25
Using automatic needle threader ------------------------------26 - 27
Picking up bobbin thread -------------------------------------------28 - 29
Needle, thread and fabric chart -----------------------------------30 - 31
Adjusting top thread tension ---------------------------------------32 - 33
Changing presser foot -----------------------------------------------32 - 33
Control panel function------------------------------------------------34 - 35
2. STARTING TO SEW
Quick reference table of stitch length and width-------------36 - 37
Straight stitching -------------------------------------------------------38 - 41
Turning a square corner, Reverse stitch, Tacking (Basting)
Running quilt stitch ----------------------------------------------------40 - 41
Zigzag stitching ---------------------------------------------------------42 - 43
Adjusting stitch width and length, Satin stitch
Placement of patterns
Blind stitch, Shell stitch-----------------------------------------------44 - 45
Multi-stitch zigzag, Faggoting, Rampart stitch ----------------46 - 47
Stretch stitches----------------------------------------------------------48 - 55
Straight stretch stitch, Overedge stitch, Ric-rac stitch,
Feather stitch, Honeycomb stitch,
Stretch overlock stitch
,
Blanket stitch, Turkish stitch, Slant overedge stitch,
Reinforced overedge stitch, Thorn stitch,Wizard stitch,
Double overedge stitch, Crossed stitch, Chevron stitch
TABLE OF CONTENTS
Sewing machine
Dimensions: 421 mm × 290 mm × 286 mm
Mass of the equipment: 9.6 kg
Embroidery unit
Dimensions: 435 mm × 210 mm × 110 mm
Mass of the equipment: 2.7 kg
Rated Voltage: 230V ~
Rated Frequency: 50Hz
Rated input: 70W
Rating for Lamp: 6.5V, 2.8W
Rated ambient temperature: 15 - 35°C
Acoustic noise level: less than 70db(A)
For European version
Continuous patterns -------------------------------------------------- 54 - 55
Decorative embroidery designs----------------------------------- 56 - 57
Tips on design stitching
Novelty patterns -------------------------------------------------------- 56 - 57
Buttonhole making ----------------------------------------------------58 - 63
Using buttonhole foot, Procedure, Corded buttonholes
Bartacking ---------------------------------------------------------------- 62 - 63
3. EMBROIDERING
Before attaching embroidery unit---------------------------------64 - 69
Attaching embroidery foot, Threading bobbin thread,
Threading top thread, Picking up bobbin thread,
Extension table, Feed dog control
Attaching embroidery unit-------------------------------------------68 - 69
Preparation for embroidery sewing------------------------------ 70 - 79
Securing material in embroidery hoop,
Using the material and stabilizer,
Preparing the machine before installing the hoop,
Attaching and removing embroidery hoop
Removing embroidery unit------------------------------------------80 - 81
Operation switches when embroidery unit is attached---- 82 - 83
Operation switches, Thread tension control
Troubleshooting -------------------------------------------------------- 84 - 89
Skipped stitches and thread breakages occur,
Embroidery pattern is mis-aligned, If stitches are missing
Error messages---------------------------------------------------------90 - 91
4. CARING FOR YOUR MACHINE
Cleaning hook area and feed dogs ----------------------------- 92 - 93
Changing light bulb --------------------------------------------------- 94 - 95
5. PERFORMANCE CHECKLIST
z------------------------- 96 - 97