Filter
Top Products
12
OPERATION SWITCHES
NEEDLE UP/DOWN SWITCH
When the needle up/down switch is pushed, the needle moves
and stops at its lowest position. If the switch is pushed once
more, the needle moves and stops at its highest position. Use for
sewing curves, corners and topstitching.
REVERSE STITCH SWITCH
Reverse sewing is carried out while the reverse stitch switch is
pushed (only for normal sewing).
NOTE: If the power cord is disconnected from the wall outlet
during sewing, or if the sewing machine stops due to a
power outage, the sewing machine will not operate
immediately even when the power is restored. To start
the sewing machine again, turn the power switch to OFF
and then back to ON again, and then start the machine.
START/STOP SWITCH
This switch works only when sewing embroidery.
Reverse stitch switch
Needle up/down switch
Start/stop switch
(For embroidery only)
LED indicator
Témoin a diode
Indicador LED
Interrupteur couture arrière
Interrupteur marche/arrêt
(Pour la broderie seulement)
Pulsador de comienzo/parada
(Sólo para bordado)
Interruptor de puntadas
hacia atrás
Interruptor agja arriba/abajo
Positionnement haut/bas
de l’aiguille
LED INDICATOR
¿ Green light indicates machine is ready to start.
¿ Red light indicates machine is operating.
¿ Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect operation
was made.
* Continuous flashing indicates that machine malfunctions.