Filter
Top Products
62
CORDED BUTTONHOLES
Hook filler cord (crochet thread or buttonhole twist) over the spur
and pull both ends of the cord forward under the foot.
Sew buttonhole so that zigzag stitches cover the cord.
When completed, release the cord from foot and snip off extra
length.
Spur
Saliente
Tige
length of bar-tack
Longueur du point d’arrêt
largo de remate
(A) (B)
(C)
Start position
Position de début
Posición de inicio
1
2
3
4
5
1 2 3 4 5
Tab A
Butées A
Lengüeta A
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
Mark
Marque
Marca
BAR-TACKING
1. Adjust the position of tab of buttonhole foot aligning with
length of bar-tack as illustrated.
2. Attach the buttonhole foot.
3. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
4. Align the start position on the fabric with the mark on the
buttonhole foot and then lower the buttonhole foot.
5. While holding the top thread, start the machine.
89