Filter
Top Products
Little Touch & Sew 67A
Table of Contents Previous Page | Next Page
27
Hankie holder for Father
Choose either lightweight felt or flannel for
your hankie holder.
1. Cut an oblong of material 14 inches long
and 8 inches wide.
2. If you use flannel, trim the top and sides
with pinking shears. It is not necessary to
pink felt, but you can do it for decoration if
you wish.
3. Fold up 5 inches at the bottom, with the
wrong side on the inside, to form a pocket.
4. Stitch along pocket sides. Use the illustra-
tion as a guide. The --- lines show you
where to stitch.
5. Sew a pretty button on the pocket part. Be
careful to sew through only one thickness
of material. If you sew through both, you
will sew the pocket together.
6. Fold top flap over to 1 inch past the button.
Make a light pencil mark where the button
is.
7. Cut a buttonhole where you mark. Make it
a little longer than the width of your button.