Filter
Top Products
Little Touch & Sew 67A
Table of Contents Previous Page | Next Page
17
How to thread the Needle
It is very important that you thread your nee-
dle correctly. The numbers on your machine
show you each step you must follow. After a
little practice you won't have to look at the
numbers. See how fast you can learn to
thread your needle correctly.
1. Turn hand wheel until needle is as high as
it will go.
2. Lower the presser foot.
3. Put a spool of No. 50 Mercerized cotton
thread on spool pin.
4. Follow the arrows and thread each step as
shown. (At step 2, make sure you place
the thread between the two tension discs.)
5. Thread the needle from front to back. Pull
out a loop of thread between the tension
dial and take-up lever and draw about 3
inches of thread through eye of needle.