Filter
Top Products
Little Touch & Sew 67A
Table of Contents Previous Page | Next Page
15
How to Wind the Bobbin continued...
4. Cut off the extra thread hanging from hole
in bobbin rim. Be sure you remove the
hand crank if you turn on the power switch.
5. Then continue winding bobbin with the
hand crank or with the power switch turned
to ON. Be sure to guide the thread with
your fingers so that it winds evenly on the
bobbin.
6. When bobbin is full, cut the thread about 2
or 3 inches away from the bobbin. Then
remove bobbin from bobbin winder.